logo

उत्पादों का विवरण

Created with Pixso. घर Created with Pixso. उत्पादों Created with Pixso.
ESP नियंत्रक
Created with Pixso.

IC695ETM001 Emerson Ethernet module high-speed communication supports hot swapping and redundancy

IC695ETM001 Emerson Ethernet module high-speed communication supports hot swapping and redundancy

ब्रांड नाम: Emerson
मॉडल संख्या: आईसी695ETM001
एमओक्यू: 1
कीमत: Negotiations
विस्तृत जानकारी
उत्पत्ति के प्लेस:
यूएसए
नेटवर्क इंटरफेस:
दो 10/100 एमबीपीएस अनुकूली RJ45 ईथरनेट पोर्ट
बिजली विनिर्देश:
तीन-चरण या एकल-चरण एसी 200 ~ 230V, 50/60Hz
प्रोसेसर और स्मृति:
अंतर्निहित 128MB रैम और 64MB फ्लैश मेमोरी के साथ 200 मेगाहर्ट्ज प्रोसेसर
कार्य -तापमान:
-10 डिग्री सेल्सियस से 55 डिग्री सेल्सियस
पैकेजिंग विवरण:
नया मूल बॉक्स
प्रमुखता देना:

Emerson Ethernet module high-speed communication

,

IC695ETM001 module supports hot swapping

,

Emerson ESP Controller redundancy module

उत्पाद का वर्णन
IC695ETM001 Emerson Ethernet Module
High-speed communication module supporting hot swapping and redundancy
The IC695ETM001 is an industrial-grade Ethernet interface module designed specifically for PACSystems RX3i series programmable automation controllers (PACs). It serves as a bridge between the controller and the Ethernet network, enabling high-speed data exchange and multiple industrial protocol communications.
Key Features and Specifications
  • Core Function: Provides Ethernet access for PACSystems RX3i controllers with support for multiple industrial protocol communications
  • Network Interface: 2 × 10/100 Mbps adaptive RJ45 Ethernet ports (auto-negotiation, full/half duplex)
  • Serial Interface: 1 × RS-232 serial port (data rate 1200-112200 bps)
  • Supported Protocols: TCP/IP, SRTP, Modbus TCP, EGD, HTTP, FTP
  • Processor and Memory: 200 MHz processor with 128MB RAM and 64MB flash memory
  • Redundancy: Supports redundant IP addressing (requires specific firmware and configuration)
  • Hot Swappable: Supported (requires firmware version 2.51 or above and compatible backplane)
  • Power Requirements: 24VDC (±10%), typical power consumption <5W
  • Operating Environment: -10°C to 55°C (some data mention -20°C to 60°C); humidity 5% to 95% (non-condensing)
  • Diagnostics: Built-in diagnostic functions, LED status indicators (system status, network status, port activity), configurable via web interface or software
  • Compatibility: Works with PACSystems RX3i series controllers and can communicate with GE Fanuc's 90 series, VersaMax series, and other controllers
Core Functionality
The IC695ETM001 module serves as a bridge between the RX3i control system and Ethernet networks, enabling high-speed data exchange and integrated communication. Its embedded switch function supports daisy chain connections, simplifying network topology and reducing switch costs. It supports time synchronization via SNTP protocol and provides station management functions accessible through Ethernet or serial port for configuration, diagnostics, and security control (including password protection).
Typical Applications
The IC695ETM001 module finds extensive use across various industrial automation fields:
  • Manufacturing: Automated production lines in automotive, electronics, and food industries
  • Energy Industry: SCADA systems for monitoring and data acquisition in power, oil, and natural gas sectors
  • Infrastructure: Water treatment plants, traffic control systems, building automation